Documentation

  • This page has easy access to documents such as manuals and how to guides for the products that we offer. Click on relevant product button to find all documents related to that product below.
Drivers and Terminal Programs
  • Drivers and terminal programs needed to communicate with Loadstar Sensors'  sensor interfaces. (HTML)
DI-1000U
  • DI-1000U Digital Load Cell Interface Manual ( PDF)
  • DI-1000U - How to calibrate a load cell to a DI-1000U using a terminal program (for example, Hyperterminal) ( HTML)
  • DI-1000U - How to calibrate a torque sensor to a DI-1000U using a terminal program (for example, Hyperterminal) ( HTML)
  • DI-1000U - How to calibrate a pressure sensor to a DI-1000U using a terminal program (for example, Hyperterminal) ( HTML)
  • DI-1000U Command Set for writing your own software ( HTML)
  • DI-1000U-5V Wiring for Sensors with 0-5V DC Output (ex. Displacement or Pressure Sensors ( HTML)
  • DI-1000UHS-1K Commands for writing your own software (PDF)
  • DI-1000UHS-10K user manual and operations guide (HTML)  (also see software user manual: LV-1000HS-10K)
  • DI-1000WiFi Setup Guide (HTML)
  • DI-1000U - Quick Start Guide for DI-1000U StandAlone Use (PDF)
  • Calibration using LoadVUE Calibration Software
DI-100U
DI-400U
  • DI-400U Calibration Quick Start Guide (HTML)

DQ-1000 Frequency to Analog Interface
    • DQ-1000A Frequency to Analog Interface User Guide ( PDF)
    • DQ-1000U Command Set ( HTML)
    • Writing your own software to communicate with iLoad Digital USB load cells and DQ-1000U digital interface units ( HTML)
    • Calibration of an iLoad Mini Series Digital USB Load Cell/DQ-1000U pair using the LoadVUE Calibration software ( HTML)
SC-1200
      • SC-1200 Quick Start Guide ( HTML)
      • SC-1200 Instruction Set and Hyperterminal Operation ( HTML)
      • SC-1200 Dipswitch Settings (PDF)
DS-3000 (Discontinued)
        • DS-3000 Digital Load Cell Display & Controller Manual (PDF)
DS-3000-Pro
        • DS-3000-Pro Digital Load Cell Display & Controller Manual (PDF)
DQ-4000
          • DQ-4000 User Manual (PDF)
          • DQ-4000HS Output Formats (HTML)
AI-1000
            • AI-1000 Single Channel Signal Conditioner Quick Start Guide and Calibration Procedure (PDF)
RD-1000
              • RD-1000 Calibration Procedure (HTML)
iLoad Series Load Cells (iLoad PRO, iLoad TR and iLoad)
            • iLoad Analog Wiring Diagram (PDF)
            • iLoad Series Command Set (HTML)
            • iLoad Series Loadcells - Instructions for Optimal Performance (PDF)
            • Driver Installation and Hyperterminal Operation (HTML)
            • Writing your own software to communicate with iLoad Digital USB load cells and DQ-1000U digital interface units (HTML)
            • iLoad Mini Application Note (HTML)
            • Calibration of an iLoad Series Digital USB Load Cell using the LoadVUE Calibration software (HTML)
HX-100
iDisp
LoadVUE Software
StockVUE
PunchSensor
                  • Quick start Guide to PunchSensor, a complete solution for tracking punch and kick forces  (PDF)
How to change the Latency Timer setting for faster responses
                  • How to change the COM port latency timer settings for faster response (HTML)
Utilities for Remote Troubleshooting
Warranty
                  • Product Warranty Sheet (PDF)
How to enable Microsoft .NET Frameworks
                  • Some versions of Loadstar Software require Micrsoft .NET 3.5 to be installed. Windows 10 and some earlier versions are not pre-installed with these versions of .NET frameworks. To active these, please consult this document.

We'll be delighted to be of service. Just let us know how!