Breadcrumbs

iLoad TR Series Tilt Resistant USB Load Cell

Digital Load Cell Highlights

Capacitive Load Cell Technology

3" Diameter, 1.2" high
Serial TTL or USB output
Available in 2,5,10,25,50,100 lb. capacities
Power supplied via USB port
No need for external power supply
Integrated power conditioning
Stored calibration, factory calibrated
Works with LoadVUE Software for display, logging and plotting of data
Data Output Rate
- 150 Hz Standard
- 500 Hz Optional

Rugged Construction

Compact design with low profile
Aluminum/Stainless steel construction
Mechanically robust
Weather resistant packaging available as an option

Easy Attachments

Convenient mounting on top and bottom of sensor
Compatible accessories available for a variety of loading conditions

Suggested Mounting

iLoad TR Suggested Mounting

The iLoad TR Digital USB load cell is designed for applications requiring reduced sensitivity to off-center loading. These load cells offer direct measurement of load via the USB port of a PC. No need for signal conditioners, data acquisition systems or special software. Just connect and start measuring!

These sensors are suitable for applications where a small platform is required for measuring loads applied to the sensor - such as a small counting scale, liquid level measurement for small canisters or the load applied by a castor wheel with a small offset to the loading axis.

	Precise Accuracies to 0.25% of full scale.			True USB No need for signal conditioning or data acquisition system.

	Rugged Stainless steel and Aluminum construction. Environmentally protected.			Easy Mounting Threaded mounting holes for easy attachment using standard fixtures.



Basic Configuration	with Tension Adapter (TX-300TA)	with Tension Adapter (TX-300TA) & Rod Ends(RE-1220)	with Foot Pedal (FP-1220)
Click on thumbnail for alternative configuration

Here's How It Works

iLoad TR USB Load Cell and Software

One iLoad TR Digital USB Load Cell
Max Data Output Rate: 150 Samples/Sec
Single-channel LV-1000 LoadVUE Pro software

Simply connect the digital load cell to a PC via the USB port. The digital load cell appears on the PC as a virtual COM port. Using a standard terminal emulator send commands to the sensor to display loads on screen. They can either be one at a time or in continuous operation mode. Alternatively, use our entry level LoadVUE Pro 1000 load cell software or any of our other LoadVUE load cell software programs to simplify load measurements on a PC.

Optional Analog Load Cell Output / Hybrid Analog and Digital Load Cell Output

iLoad TR with Digital/Analog output

Our iLoad Series capacitive load cells can optionally output an Analog 0-5 V DC output from the same sensor! This analog output is in addition to the normal digital Serial TTL or USB output that is available as a standard feature. If you purchase the optional HX-100 hybrid load cell breakout board, then you can get easy access to the analog as well as the digital output. We provide optional analog calibration as an additional option when ordering these digital load cells.

One iLoad TR Digital USB Load Cell
One HX-100 Hybrid Digital/Analog Interface
Max Data Output Rate: 150 Samples/Sec
Single-channel LV-1000 LoadVUE Pro software

Application Development

If you are looking to develop your own custom software application, these sensors offer convenient ASCII commands to obtain calibrated load information directly from the sensor without need for any signal conditioning, calibration or data processing.

With just a few commands you'll be able to incorporate load/force/weight information into your application. Click here for an example of sample commands.

You can use Visual Basic, Visual C++, Matlab, LABView or any other application development environment to create your custom applications with our sensors.

Product Details

C-Compression, T-Tension, U-Universal

SKU	Capacity	Accuracy	Calibratiion	Material	Price	Quantity
TUF-002-100-A*C01	2 lb	1%	C	Aluminum	Please login to see price	N/A
TUF-002-100-A*C02	2 lb	1%	T	Aluminum	Please login to see price	N/A
TUF-002-100-A*C03	2 lb	1%	U	Aluminum	Please login to see price	N/A
TUF-005-100-A*C01	5 lb	1%	C	Aluminum	Please login to see price	N/A
TUF-005-100-A*C02	5 lb	1%	T	Aluminum	Please login to see price	N/A
TUF-005-100-A*C03	5 lb	1%	U	Aluminum	Please login to see price	N/A
TUF-010-050-A*C01	10 lb	0.5%	C	Aluminum	Please login to see price	N/A
TUF-010-050-A*C02	10 lb	0.5%	T	Aluminum	Please login to see price	N/A
TUF-010-100-A*C03	10 lb	1%	U	Aluminum	Please login to see price	N/A
TUF-050-025-A*C01	50 lb	0.25%	C	Aluminum	Please login to see price	N/A
TUF-050-025-A*C02	50 lb	0.25%	T	Aluminum	Please login to see price	N/A
TUF-050-100-A*C03	50 lb	1%	U	Aluminum	Please login to see price	N/A
TUF-100-025-S*C01	100 lb	0.25%	C	Steel	Please login to see price	N/A
TUF-100-025-S*C02	100 lb	0.25%	T	Steel	Please login to see price	N/A
TUF-100-100-S*C03	100 lb	1%	U	Steel	Please login to see price	N/A

Digital Wired Load Cell Interfaces
Once you've picked a load cell and max capacity, please select an interface device if needed. We offer digital interfaces with Serial TTL/USB Output.

SKU	Description	Channels	Max. Data Rate	Output	Price	Quantity
HX-400	4 Channel USB Hub	4	500	USB (VCOM)	Please login to see price	N/A
HX-700	7 Channel USB Hub	7	500	USB (VCOM)	Please login to see price	N/A
SC-1200	Twelve Channel Concentrator	12	1 per channel	USB (VCOM)	Please login to see price	N/A
UX-300	USB Over Ethernet Adapter Pair	1	N/A	USB (VCOM)	Please login to see price	N/A
UX-100	USB Extender - 5m/15 ft	1	N/A	USB (VCOM)	Please login to see price	N/A

Digital Wireless Load Cell Interfaces
Once you've picked a load cell and max capacity, please select an interface device if needed.

SKU	Description	Channels	Max. Data Rate	Output	Price	Quantity
SC-1200Z	Twelve Channel Concentrator - Wireless	12	1 per channel	IEEE 802.15.4	Please login to see price	N/A
SC-1200ZP	Twelve Channel Concentrator - Wireless - Recheargeable Battery	12	1 per channe	IEEE 802.15.4	Please login to see price	N/A

Analog Load Cell Interfaces
Once you've picked a load cell and max capacity, please select an analog interface device for a 0-5 VDC output if needed.

SKU	Description	Channels	Max. Data Rate	Output Protocol	Price	Quantity
HX-100	Hybrid Load Cell Interface	1	-	0.5 - 4.5 V DC & USB	Please login to see price	N/A

Load Cell Software
Digital USB sensors or sensors with digital interfaces can be operated on a PC via our LoadVUE, SensorVUE or ControlVUE software. Single Channel software can be used with single sensors, SensorVUE with multiple sensors and ControlVUE can be used to control external devices via USB relays.

SKU	Description	Channels	Sensors Supported	Logging	Plotting	Relay	Speed	Price	Quantity
LV-100	LoadVUE Load Cell Display S/W	1	Load, Force, Weight	No	No	No	10	Please login to see price	N/A
LV-1000	LoadVUE Pro - 1 Channel	1	Load, Force, Weight	Yes	Yes	No	Up to 1 Khz	Please login to see price	N/A
LV-4000CG	LoadVUE Pro - Center of Gravity	4	Load, Force, Weight	Yes	Yes	No	100	Please login to see price	N/A
LV-1000HS-10K	LoadVUE High Speed 10KHz	1	Impact Force	Yes	Yes	No	1KHz up to 50Khz	Please login to see price	N/A
SensorVUE	SensorVUE	Unlimited	All	Yes	Yes	No	up to 1 KHz	Please login to see price	N/A
ControlVUE	ControlVUE	Unlimited	All	Yes	Yes	Yes	up to 1 KHz	Please login to see price	N/A

Calibration Options
After you've picked a load cell and interface device if needed, please select a calibration option from those shown below. It could be digital calibration or analog (0.5 to 4.5 VDC) calibration. And the mode can be compression only, tension only or universal.

SKU	Mode	Direction	Capacity	Price	Quantity
ACAL*C01	Analog	Compression	Up to 10K lb.	Please login to see price	N/A
ACAL-HC*C01	Analog	Compression	Above 10K lb.	Please login to see price	N/A
ACAL*C02	Analog	Tension	Up to 10K lb.	Please login to see price	N/A
ACAL-HC*C02	Analog	Tension	Above 10K lb.	Please login to see price	N/A
ACAL*C03	Analog	Universal	Up to 10K lb.	Please login to see price	N/A
ACAL-HC*C03	Analog	Universal	Above 10K lb.	Please login to see price	N/A

High Data Output Rate Options
Max data rate is about 150 Hz by default for our Capacitive load cells with USB output. To get data rates as high as 500 readings/sec, please add the high speed option to your order.

SKU	Description	Price	Quantity
CAP-HS-01	High Data Output Rate Option (for 1 load cell)	Please login to see price	N/A
CAP-HS-04	High Data Output Rate Option (for 4 load cells)	Please login to see price	N/A

Hardware Accessories
These fully integrated digital load cells (USB load cells) (3" dia. and 1.2" high), are designed for applications requiring reduced sensitivity to off-center loading. It comes in capacities up to 100 lbs and accuracies up to +/- 0.25% of full scale. These sensors offer a threaded hole on the top and three threaded mounting holes on the bottom to help fasten various accessories to the sensor.

Universal Adapters
Add these universal adapters if you want apply a tensile load.

SKU	Thread Size	For Use with Load Cells	Price	Quantity
TX-325	#1/2-20	iLoad Pro (less than 5K lb.)	Please login to see price	N/A
TX-300A	#1/2-20	iLoad TR Series	Please login to see price	N/A
IX-125	#1/4-28	iLoad Mini Series	Please login to see price	N/A
IX-125A	#1/4-28	iLoad Mini Series	Please login to see price	N/A
IX-300	#8-32	iLoad Low Profile Series	Please login to see price	N/A
TX-125	#1/4-28	iLoad Mini Series	Please login to see price	N/A
TX-125A	#1/4-28	iLoad Mini Series	Please login to see price	N/A
TX-400	#7/8-14	iLoad Pro (5K to 10K lb.)	Please login to see price	N/A

Rod Ends
Add these universal adapters if you want apply a tensile load.

SKU	Thread Type	Thread Size	For Use with Load Cells	Price	Quantity
RE-1428-M	Male	1/4"	RAS1 upto 200 lb.	Please login to see price	N/A
RE-M5-F	Female	M5	REB7, 10 kg.	Please login to see price	N/A
RE-M3-M	Male	M3	S-Beam Jr.	Please login to see price	N/A
RE-M10-F	Female	M10	RSS1 200 lb.	Please login to see price	N/A
RE-7814-M	Male	7/8"	iLoad Pro 5K lb. & 10K lb.	Please login to see price	N/A
RE-1220-M	Male	1/2" - 20	iLoad TR upto 100 lb., iLoad Pro upto 2500 lb., RAS1 250 to 3K lb.	Please login to see price	N/A
RE-11412-M	Male	1 1/4" - 12	RRS1 20K lb., RAS1 40K lb.	Please login to see price	N/A
RE-112-M	Male	1" - 12	RRS1 15K lb.	Please login to see price	N/A
RE-1428-F	Female	1/4"	iLoad Mini 100 lb. & 200 lb	Please login to see price	N/A
RE-3416-M	Male	3/4" - 16	RRS1 5K to 10K lb., RAS1 5K to 10K lb.	Please login to see price	N/A
RE-1032-F	Female	#10-32	iLoad Mini upto 50 lb.	Please login to see price	N/A
RE-M6-F	Female	M6	REB7 100 kg, RSB4 10-200 kg	Please login to see price	N/A

Eye Bolts
Add these eye bolts if you want apply a tensile load. You will need 2 for each load cell. You will also need a universal adapter for each load cell.

SKU	Thread Size	For Use with Load Cells	Price	Quantity
EB-3416	3/4	RRS1 5K lb, RAS1 5K lb.	Please login to see price	N/A
EB-1220	1/2	RRS1 500-1500 lb., RAS1 250-2000 lb., RAL1 1500-2500 lb.	Please login to see price	N/A
EB-M18	M18	RSS1 3000 kg and 5000 kg	Please login to see price	N/A
EB-1428	1/4	RRS1 upto 300 lb., RAS1 upto 200 lb., IX-125 iLoad Mini Tension Adapter	Please login to see price	N/A
EB-1420	1/4-20	iLoad Mini: IX-125 and IX-125A Tension Adapters	Please login to see price	N/A

Load Buttons
Add these load buttons for easy application of a compressive load.

SKU	Thread Size	For Use with Load Cells	Price	Quantity
LB-1220	#1/2-20	iLoad Pro upto 2500 lb., iLoad TR upto 100 lb., RAL1 5K & 10K lb.	Please login to see price	N/A
LB-7814	#7/8-14	iLoad Pro 5K lb. and 10K lb.	Please login to see price	N/A

Expedited Processing Options
Normal lead time for shipping orders is approx. one week after receipt of order via Fedex 3 Day service for US orders. If you want expedited processing of your order, please select one of the options below. Note: Fee is per item.

SKU	Description	Price	Quantity
EXP-02	Expedite Fee - Process & Ship Within 1 Business Day of receipt of order	Please login to see price	N/A
EXP-01	Expedite Fee - Process & Ship Within 3 Business Days of receipt of order	Please login to see price	N/A
EXP-03	Expedite Fee - Process & Ship Within Same Business Day of receipt of order if possible or the next business day	Please login to see price	N/A


Capacitive Load Cells	Resistive Load Cells	Capacitive Load Cell Interfaces	Resistive Load Cell Interfaces	Mechanical Accessories	Electronic Accessories	Load Cell Software

User Login

Breadcrumbs

iLoad TR Series Tilt Resistant USB Load Cell

Digital Load Cell Highlights

Capacitive Load Cell Technology

Rugged Construction

Easy Attachments

Suggested Mounting

Optional Analog Load Cell Output / Hybrid Analog and Digital Load Cell Output

Application Development

Digital Wired Load Cell Interfaces Once you've picked a load cell and max capacity, please select an interface device if needed. We offer digital interfaces with Serial TTL/USB Output.

Digital Wireless Load Cell Interfaces Once you've picked a load cell and max capacity, please select an interface device if needed.

Analog Load Cell Interfaces Once you've picked a load cell and max capacity, please select an analog interface device for a 0-5 VDC output if needed.

Calibration Options After you've picked a load cell and interface device if needed, please select a calibration option from those shown below. It could be digital calibration or analog (0.5 to 4.5 VDC) calibration. And the mode can be compression only, tension only or universal.

High Data Output Rate Options Max data rate is about 150 Hz by default for our Capacitive load cells with USB output. To get data rates as high as 500 readings/sec, please add the high speed option to your order.

Expedited Processing Options Normal lead time for shipping orders is approx. one week after receipt of order via Fedex 3 Day service for US orders. If you want expedited processing of your order, please select one of the options below. Note: Fee is per item.

VirtueMart Shopping Cart