Raw sensor readings as well as Peak and Low values can be plotted as a X-Y (Force vs. Time) plot. Additional data such as derived values (Formula sensors) as well as averaged and /or median readings can also be plotted to remove unwanted sensor noise, damp vibrations etc.

Data can be logged to Excel compatible CSV files. Depending on the sensor, data logging at different rates can be captured from a drop down list up to a maximum of 1000 Hz. For data rates up to 50 khz use LV-1000HS-10K software and for data rates up to 1 Khz use  SensorVUE software.

Sensor Data can be read in many applicable units, for example:
Pounds, Newton, Kilogram, Grams for force/weight sensors.

• Use SensorVUE software for displaying/logging/plotting other types of sensors such as Torque, Displacement, Pressure, Level  etc. 

Combine one or more sensors to create a virtual sensor. Simple formulas (using the 4 basic operations: + - * / ) can be used to create a virtual sensor. For example if you are using a force sensor and know the area under the force, you can plot the stress by creating a formula Force/Area. You can then log, plot, set alarms on, etc these virtual sensors just as you would a real sensor. You can even combine formula sensors to create a new formula sensor.

A utility to calibrate your digital load cells is included in the package. You can simply enter the mV/V information provided by the manufacturer or perform a 2 point or multipoint calibration and burn the coefficients into the sensor or interface.

Loadstar Sensors also provides NIST traceable calibration services if you would like us to perform the calibration for you.

These filters can be applied to sensors to filter out unwanted noise and vibrations from the raw readings.

Audio alarms can configured to trigger when specific conditions are met, for example, when load exceeds a specified limit. Emails and/or text messages can be sent when audio alarms are triggered.

You can use this feature during manufacturing operations for e.g. to let a technician know when a certain force threshold has been met.

Upgrade to SensorVUE software to get full featured display/log/plot features for ALL digital sensors offered by Loadstar Sensors at up to 1 KHz data updte rate.

Upgrade to ControlVUE software to turn external devices such as motors, lamps, sirens, pumps etc on/off based on sensor values using USB relays.