RRS1 S-Beam Load Cell (Alloy Steel)

Highlights

Load Cell Technology

Simplifies Load Measurements

Rugged & Reliable

Alloy steel construction
Mechanically robust design
Weather-resistant packaging

Easy Attachment

Convenient mounting on top and bottom of sensor

Multiple Load Cell Capacities

Check below for Load Cell Capacities and for other Specifications.

Suggested Mounting for S-Beam Load Cell

	Precise Non-Linearity from 0.03% of full scale.
	Rugged Alloy steel construction.
	Easy Mounting Threaded mounting holes for easy attachment using standard fixtures.

Named for their s-type shape, S beam load cells are most often found in mechanical-to-electronic scale conversion applications, suspended hoppers or tanks and general purpose digital weighing scale applications. These load cells are available in capacities ranging from 250 lb. through 20,000 lb..

USB Upgrade

Simply connect the load cell to the DI-1000U Digital Load Cell Interface & use the USB out port on the DI-1000 to connect to a PC via the USB port. The DI-1000U is a signal conditioner and 24-bit digitizer and handles all the communications functions to talk with USB port of a PC. When connected this way, the load cell appears on the PC as a virtual COM port. Using a standard terminal emulator you can send commands to the sensor to display loads on screen. They can either be one at a time or in continuous operation mode. You can also use Matlab, LabView or other popular programs to communicate and get calibrated readings from the load cell. Alternatively, use our application (LoadVUE) to display, log or plot load measurements on a PC.

If you do not need the very high precision of the DI-1000U, you can use our DI-100U digital load cell interface with 16 bit ADCs and Serial TTL or USB output. The DI-100U is sufficient for accuracies of +/- 0.1% of full scale output. Or in other words if you need to measure +/- 1 lb accuracy over 1000 lb range or +/- 0.1 lb accuracy over 100 lb range, then the DI-100U is more than adequate for your application.

Product Details

C-Compression, T-Tension, U-Universal

SKU	Capacity	Accuracy	Material	Price	Quantity
RRS1-250S-S	250 lb	0.03%	Steel	Click here to see price	N/A
RRS1-500S-S	500 lb	0.03%	Steel	Click here to see price	N/A
RRS1-2HKS-S	2500 lb	0.03%	Steel	Click here to see price	N/A
RRS1-05KS-S	5000 lb	0.03%	Steel	Click here to see price	N/A
RRS1-10KS-S	10000 lb	0.03%	Steel	Click here to see price	N/A

Digital Wired Load Cell Interfaces

Once you've picked a resistive load cell and max capacity, please select a wired digital or analog interface device if needed. We offer digital interfaces with Serial TTL (UART) or USB Output. Once you pick a load cell and an interface, do not forget to add a calibration option to the order!

SKU	ADC Bits	Max. Data Rate	Output	Price	Quantity
DI-100U	16	40	Serial TTL/USB	Click here to see price	N/A
DI-100UHS	16	275	Serial TTL/USB	Click here to see price	N/A
DI-1000U	24	80	USB (VCOM)	Click here to see price	N/A
DI-1000U-5V	24	80	USB (VCOM)	Click here to see price	N/A
DI-1000UHS-5V	24	500	USB (VCOM)	Click here to see price	N/A
DI-1000UHS	24	500	USB (VCOM)	Click here to see price	N/A
DI-1000UHS-1K	24	1 KHz	USB (VCOM)	Click here to see price	N/A
DI-1000UHS-10K	24	50 KHz	USB (VCOM)	Click here to see price	N/A
DI-400U	16	40	USB (VCOM)	Click here to see price	N/A
DI-400UHS	16	250 Hz per Channel	USB	Click here to see price	N/A
DS-3000-Pro-1 Channel	-	10	USB (VCOM)	Click here to see price	N/A
DS-3000-Pro-4 Channel	-	10	USB (VCOM)	Click here to see price	N/A

Digital Wireless Load Cell Interfaces

Once you've picked a load cell and capacity, please select a wireless interface device if needed. Some of the devices have optional rechargeable battery power built in to them (like in DI-1000ZP). Once you pick a load cell and an interface, do not forget to add a calibration option to the order!

SKU	ADC Bits	Max. Data Rate	Output	Price	Quantity
DI-1000ZP	24	16	IEEE 802.15.4	Click here to see price	N/A
DI-1000-BLE	24	1	BLE	Click here to see price	N/A
DI-1000-WiFi	24	1	WiFi	Click here to see price	N/A
DI-1000ZP-5V	24	16	IEEE 802.15.4	Click here to see price	N/A
DI-1000-BLE-5V	24	1	BLE	Click here to see price	N/A
DI-1000-WiFi-5V	24	1	USB (VCOM)	Click here to see price	N/A

Analog Load Cell Interfaces

The AI-1000/AI-1000-CV are strain gage amplifiers is an interface designed to amplify strain gauges arranged in a full Wheatstone bridge configuration, and is suitable for many applications where a bridge or differential input amplifier is required.

SKU	Output Protocol	Ports	Wired/Wireless	Range	Price	Quantity
AI-1000	Analog (0.5-4.5VDC)	1	No	n/a	Click here to see price	N/A
AI-1000-CV	Analog (0.5-4.5V DC, 4-20mA)	1	No	n/a	Click here to see price	N/A

High Data Output Rate Options

Normal data rate for DI-100U USB load cell interface is about 40 readings/sec and for the DI-1000U it is 80 readings/sec. You can add the high speed option to your order to get the data rate of the DI-100U to up to 275 readings/sec or the DI-1000U to up to 500 readings/sec. The high-speed option pricing shown below includes upgrade to the high-speed version of LoadVUE as well.

SKU	Description	Price	Quantity
RES-HS-500	500Hz Output Rate Option (for 1 load cell)	Click here to see price	N/A
RES-HS-1K	1KHz Data Output Rate Option (for 1 load cell)	Click here to see price	N/A
RES-HS-04	High Data Rate Option (500 Hz for 4 load cells)	Click here to see price	N/A

Load Cell Software

Digital USB sensors or sensors with digital interfaces can be operated on a PC via our LoadVUE, SensorVUE or ControlVUE software. Single Channel software can be used with single sensors, SensorVUE with multiple sensors and ControlVUE can be used to control external devices via USB relays.

SKU	Description	Channels	Sensors Supported	Logging	Plotting	Relay	Speed	Price	Quantity
LV-100-PC	LoadVUE Load Cell Display S/W	1	Load, Force, Weight	No	No	No	10	Click here to see price	N/A
LV-1000	LoadVUE Pro - 1 Channel	1	Load, Force, Weight	Yes	Yes	No	Up to 1 Khz	Click here to see price	N/A
LV-4000CG	LoadVUE Pro - Center of Gravity	4	Load, Force, Weight	Yes	Yes	No	100	Click here to see price	N/A
LV-1000HS-10K	LoadVUE High Speed 10KHz	1	Impact Force	Yes	Yes	No	1KHz up to 50Khz	Click here to see price	N/A
SensorVUE	SensorVUE	Unlimited	All	Yes	Yes	No	up to 1 KHz	Click here to see price	N/A
ControlVUE	ControlVUE	Unlimited	All	Yes	Yes	Yes	up to 1 KHz	Click here to see price	N/A

Calibration Options

After you've picked a load cell and interface device if needed, please select a calibration option from those shown below. It could be digital calibration or analog (0.5 to 4.5 VDC) calibration. And the mode can be compression only, tension only or universal. You MUST select and pay for at least one calibration if you are purchasing a load cell with an interface device.

SKU	Mode	Direction	Capacity	Price	Quantity
ACAL-MV*C01	mV/V	Compression	Below 10K lb.	Click here to see price	N/A
ACAL-MV*C02	mV/V	Tension	Below 10K lb.	Click here to see price	N/A
ACAL-MV*C03	mV/V	Tension & Compression	Below 10K lb.	Click here to see price	N/A
ACAL*C01	Analog	Compression	Up to 10K lb.	Click here to see price	N/A
ACAL*C02	Analog	Tension	Up to 10K lb.	Click here to see price	N/A
ACAL*C03	Analog	Universal	Up to 10K lb.	Click here to see price	N/A
DCAL*C01	Digital	Compression	Up to 10K lb.	Click here to see price	N/A
DCAL*C02	Digital	Tension	Up to 10K lb.	Click here to see price	N/A
DCAL*C03	Digital	Universal	Up to 10K lb.	Click here to see price	N/A
ACAL-MV-HC*C01	mV/V	Compression Only	Above 10K lb.	Click here to see price	N/A
ACAL-MV-HC*C02	mV/V	Tension	Above 10K lb.	Click here to see price	N/A
ACAL-MV-HC*C03	mV/V	Tension & Compression	Above 10K lb.	Click here to see price	N/A
ACAL-HC*C01	Analog	Compression	Above 10K lb.	Click here to see price	N/A
ACAL-HC*C02	Analog	Tension	Above 10K lb.	Click here to see price	N/A
ACAL-HC*C03	Analog	Universal	Above 10K lb	Click here to see price	N/A
DCAL-HC*C01	Digital	Compression	Above 10K lb.	Click here to see price	N/A
DCAL-HC*C02	Digital	Tension	Above 10K lb.	Click here to see price	N/A
DCAL-HC*C03	Digital	Universal	Above 10K lb.	Click here to see price	N/A

Hardware Accessories

Add one more of these accessories for convenient operation. Some accessories are only used with specific load cells.

Rod Ends

Add one more of these accessories for convenient operation. Some accessories are only used with specific load cells.

SKU	Thread Type	Thread Size	For Use with Load Cells	Price	Quantity
RE-1428-M	Male	1/4"	RAS1 upto 200 lb.	Click here to see price	N/A
RE-1032-F	Female	#10-32	iLoad Mini upto 50 lb.	Click here to see price	N/A
RE-3416-M	Male	3/4" - 16	RRS1 5K to 10K lb., RAS1 5K to 10K lb.	Click here to see price	N/A
RE-1428-F	Female	1/4"	iLoad Mini 100 lb. & 200 lb	Click here to see price	N/A
RE-112-M	Male	1	RRS1 15K lb.	Click here to see price	N/A
RE-11412-M	Male	1 1/4" - 12	RRS1 20K lb., RAS1 40K lb.	Click here to see price	N/A
RE-1220-M	Male	1/2" - 20	iLoad TR upto 100 lb., iLoad Pro upto 2500 lb., RAS1 250 to 3K lb.	Click here to see price	N/A
RE-7814-M	Male	7/8"	iLoad Pro 5K lb. & 10K lb.	Click here to see price	N/A
RE-M10-F	Female	M10	RSS1 200 lb.	Click here to see price	N/A
RE-M3-M	Male	M3	S-Beam Jr.	Click here to see price	N/A
RE-M5-F	Female	M5	REB7, 10 kg.	Click here to see price	N/A
RE-M6-F	Female	M6	REB7 100 kg, RSB4 10-200 kg	Click here to see price	N/A

Eye Bolts

Add these eye bolts if you want apply a tensile load. You will need 2 for each load cell. You will also need a universal adapter for each load cell.

SKU	Thread Size	For Use with Load Cells	Price	Quantity
EB-3416	3/4	RRS1 5K lb, RAS1 5K lb.	Click here to see price	N/A
EB-1220	1/2	RRS1 500-1500 lb., RAS1 250-2000 lb., RAL1 1500-2500 lb.	Click here to see price	N/A
EB-M18	M18	RSS1 3000 kg and 5000 kg	Click here to see price	N/A
EB-1428	1/4	RRS1 upto 300 lb., RAS1 upto 200 lb., IX-125 iLoad Mini Tension Adapter	Click here to see price	N/A
EB-1420	1/4-20	iLoad Mini: IX-125 and IX-125A Tension Adapters	Click here to see price	N/A

Load Buttons

Add these load buttons for easy application of a compressive load.

SKU	Thread Size	For Use with Load Cells	Price	Quantity
LB-1220	#1/2-20	iLoad Pro upto 2500 lb., iLoad TR upto 100 lb., RAL1 5K & 10K lb.	Click here to see price	N/A
LB-7814	#7/8-14	iLoad Pro 5K lb. and 10K lb.	Click here to see price	N/A
LB-3416	#3/4-16	RAS1 5k lb. & 10K lb., RAL1 25K lb. & 50K lb.	Click here to see price	N/A

Expedited Processing Options

Normal lead time for shipping orders is approx. two weeks after receipt of order via FedEX 3 Day service for most US orders. If you want expedited processing of your order, please select one of the options. Note: Fee is per item. And it is on a best efforts basis. Sometimes we might be late by a day or two due to unforeseen issues or problems.

SKU	Description	Price	Quantity
EXP-02	1 Day Expedite Fee Per Sensor - Process & Ship Within 1 Business Day of receipt of order	Click here to see price	N/A
EXP-01	3 Day Expedite Fee Per Sensor - Process & Ship Within 3 Business Days of receipt of order	Click here to see price	N/A
EXP-03	Same Day Expedite Fee Per Sensor - Process & Ship Within Same Business Day of receipt of order if possible or the next business day	Click here to see price	N/A
EXP-04	One Week Expedite Fee Per Sensor - Process & Ship Within one week of receipt of order	Click here to see price	N/A

Top