Please make sure that you have added Calibration Service to your order. If you missed adding the Calibration, click on the 'Continue Shopping' button and select the calibration option.
NOTE: If you don't order any calibration service, the sensors will come with a nominal mV/V value only.
iLoad USB Load Cell: Build and Buy
|
iLoad low profile Digital USB load cells offer direct measurement of loads via the USB port of a PC. No need for signal conditioners, data acquisition systems or special software. Just connect and start measuring! They are only 3" in diameter and about 0.5" high and are great for measuring in-line loads and forces under room temperature conditions where one can tare the reading at zero load, place the load and take a measurement. These load cells offer direct measurement of loads via the USB port of a PC or via UART with an Arduino or with a PLC via the optional 0.5 to 4.5VDC analog output. Ideal for moderate accuracty applications in controlled room temperature environments where you can "Tare" and "Read" values. No need for signal conditioners, data acquisition systems or special software. Just connect via USB and start measuring using LoadVUE, SensorVUE, or ControlVUE loadcell software. Or display force, load, or weight on our touch-screen load cell displays. |
 |
NOTE: Capacitive Load Cells come Pre-Calibrated and are Ready-to-Use.
