2. Home
The selected products have been added to your cart.
Please make sure that you have added Calibration Service to your order. If you missed adding the Calibration, click on the 'Continue Shopping' button and select the calibration option.
NOTE: If you don't order any calibration service, the sensors will come with a nominal mV/V value only.
Continue Shopping Show Cart

RAS1 Analog Kits: Buy Now

To use the RAS1 S-beam load cell with data acquisition systems or PLCs, you can use the load cell with our AI-1000 Load Cell interface which provides an amplified 0.5 to 4.5V output proportional to the applied loads. The Analog kit comes with calibration and the formula to convert from voltage to loads/forces when ordered in this configuration. For 4-20 mA  current output, use the AI-1000-CV. 

RAS1 S-beam load cell Analog Kit

 

To build your order, select the Capacity of load cell, Analog Interface, Calibration type, any Accessories, and Expedited Processing option (if required). 

To explore all available configuration options, visit the comprehensive RAS1 Build your Order page.

NOTE: Each load cell needs to be calibrated with its own interface and the pair needs to be calibrated together. 

RAS1 S-Beam Load Cell: Build and Buy

Please select a load cell and then add an interface, calibration and software from the choices shown below. Please note that the load cells come uncalibrated with a nominal mV/V value. If you do not need an interface but want calibration for the load cell please add the ACAL-MV*C0x calibration service to get a specific mV/V value.

$

Analog Interface (0-5VDC or 4-20mA Signal Conditioner/Amplifier)

When you need to connect your load cell to a PLC via analog signal, you can choose to do so via a 0-5V DC output or a 4-20 mA current output. For long distances from the interface (over 20 feet), we suggest the AI-1000-CV else the AI-1000 works great to connect with a PLC or DAQ.

$

Calibration - Analog (with AI-1000)

When connecting a load cell with an analog interface, add ACAL*C0x. When connecting with a digital interface add DCAL*C0x. If no interface is needed but you want analog calibration of the load cell then select ACAL-MV*C0x for a mV/V value specific to your load cell. For capacities over 10K lbs add ACAL-HC*C0x or DCAL-HC*C0x.

$

Calibration - Analog with Current (with AI-1000-CV)

When connecting a load cell with an analog interface, add ACAL*C0x. When connecting with a digital interface add DCAL*C0x. If no interface is needed but you want analog calibration of the load cell then select ACAL-MV*C0x for a mV/V value specific to your load cell. For capacities over 10K lbs add ACAL-HC*C0x or DCAL-HC*C0x.

$

Mechanical Accessories

Sometimes adding one of these mechanical accessories to your order can help expedite your timeline because of the convenience of having a finished product. Choose one of these accessories that might make things easier for you.

$

Expedited Processing

Our normal processing for orders received with payment or with POs for those with established accounts is about two weeks. For faster processing select one of the options shown below. This expedited processing is on a best efforts basis.

$
Discount:  $
Total Price:  $
logo