These sensors are 0-5V DC analog output devices by default. If you wish to use it in Analog mode, please add ACAL*DISP in the calibration section to get a calibrated 0.5 to 4.5V DC output proportional to the displacement. If you do NOT add this calibration then the sensor will come uncalibrated. If you wish to get USB output, or wireless output then select one of the digital interfaces from the options shown below.

USB Interface: Select an interface to mate with the displacement sensor (iLVDT or iSP) you selected & add a calibration service (DCAL*DISP) for each. The DI-1000U-5V comes with a miniB to USB A Output cable each. Add HX-100 adapter board for easy access to UART output. The max data rates and number of channels is shown for each item. If you need higher speeds see options in the next selection box. Please NOTE: You MUST use one interface PER sensor. They must be calibrated and used together. You cannot mix and match sensors and interfaces. High Speed USB Interface: When you need to measure displacements at a faster rate, you may want to use one of these higher speed devices for faster data capture. Note that the DI-1000UHS-5V, or the DI-1000UHS-1K work with SensorVUE software for data rates up to 1KHz. Wireless Interface: When you want to connect with a PC or Mac wirelessly we recommend the DI-1000ZP-5V wireless interface that works great for up to 300 odd meters or about a 1000 feet even in industrial settings. For less than 10 feet, and to connect with iOS devices we recommend the DI-1000BLE-5V or the DI-1000WiFi-5V. Please contact us for availability and price.

If you wish to use it in Analog mode, please add ACAL*DISP in the calibration section to get a calibrated 0.5 to 4.5V DC output proportional to the displacement. When connecting with a digital interface add DCAL*DISP. A calibration certificate will be included at no extra charge.

Use SensorVUE software to Display, Log, and Plot data from the displacement sensor. Use ControlVUE to Display, Log, and Plot data and Control devices.

Add an electronic accessory from the options shown below if needed. All DI-1000U-5V variants come with a 6 foot long MiniB to USBA USB cable (MX-600-B2A). All wireless interfaces come with a power supply with US style adapters. The most commonly selected accessory is the UX-100 extender cable to add 5m or 15 feet to the distance from the USB output to your PC/Tablet. You can daisy chain up to three UX-100s to add up to 45 feet.

Our normal processing for orders received with payment or with POs for those with established accounts is about two weeks. For faster processing select one of the options shown below. This expedited processing is on a best efforts basis.