Non-Linearity from 0.5% of full scale. Rugged Steel construction. Easy to use

USB Load Cell Configuration

One REB5 Subminiature Load Cell DI-1000U 24-bit digital load cell interfaces Single-channel LV-1000 LoadVUE Pro software

Simply connect the load cell to the DI-1000U Digital Load Cell Interface & use the USB out port on the DI-1000 to connect to a PC via the USB port. The DI-1000U is a signal conditioner and 24-bit digitizer and handles all the communications functions to talk with USB port of a PC.  When connected this way, the load cell appears on the PC as a virtual COM port. Using a standard terminal emulator you can send commands to the sensor to display loads on screen. They can either be one at a time or in continuous operation mode. You can also use Matlab, LabView or other popular programs to communicate and get calibrated readings from the load cell.  Alternatively, use our application (LoadVUE) to display, log or plot load measurements on a PC.

If you do not need the very high precision of the DI-1000U, you can use our DI-100U digital load cell interface with 16 bit ADCs and Serial TTL or USB output.  The DI-100U is sufficient for accuracies of +/- 0.1% of full scale output.  Or in other words if you need to measure +/- 1 lb accuracy over 1000 lb range or +/- 0.1 lb accuracy over 100 lb range, then the DI-100U is more than adequate for your application.

One REB5 Subminiature Load Cell One DI-100U 16-bit digital load cell interface Single-channel LV-1000 LoadVUE Pro software

Wireless Load Cell Configuration

REB5 Subminiature Load Cell DI-1000ZP wireless digital load cell interface with battery backup Single-channel LV-1000 LoadVUE Pro software

Four-Sensor USB Kit

If you are looking to build a weighing platform, you can purchase this kit which includes all items you would need:

Four REB5 Subminiature Load Cells Four DI-1000U or DI-100U digital load cell interfaces One four-port USB hub Four-channel LV-4000 LoadVUE Pro software

Analog Load Cell Configuration

_

One REB5 Subminiature Load Cell One AI-1000 Analog Signal Conditioner

Application Development

If you are looking to develop your own custom software application, our digital USB load cells and wireless load cell interfaces offer convenient ASCII commands to obtain load information directly from the interfaces/load cells without need for any signal conditioning or data processing.

With just a few commands you'll be able to incorporate load/force/weight information into your application. Click here for an example of sample commands.

You can use Visual Basic, Visual C++, Matlab, LABView or any other application development environment to create your custom applications with our interface/load cells.