Loadstar Sensors Login

Load Cells and Load Cell Accessories

We have developed a series of easy to use products to meet your load sensing needs. We offer a range of load cells,indicators and software options to enable you to quickly measure loads,forces and weights. If you are designing a new product you can prototype your products with these standard products and contact us to customize for your specific requirements.

USB/Digital Load Cells Analog/Resistive Load Cells CUSB/Digital Interfaces Analog/Resistive Interfaces Accessories Load Cell Kits load cell softwares
Capacitive Load Cells Resistive Load Cells Capacitive Interfaces Resistive Interfaces Accessories Load Cell Kits Load Cell Software

Accessories

Order by:
All products proudly made in the USA. Load Cells made in the USA.
Load Cell Caster Wheels
Load Cell Caster Wheels
Loadstar CW Series Caster Wheels can be utilized with our iLoad Pro and iLoad TR load cells for weighing in motion. These Caster Wheels are available in three different sizes and can support up to 275 lb. capacities. Made from Polyurethane on Plastic. For more information, see our Load Cell Caster Wheels Page
Active USB Extender Cables
Active USB Extender Cables
This cable contains active electronics which boost the USB signal for maximum reliability and performance over extended distances. Up to 3 of these USB Active Extension cables can be linked together to extend the distance to your USB Load Cell to nearly 15 meters (45 feet) For more information, see our Active USB Extender Cables Page
Spacer for RSP1 Single Point Load Cell
Spacer for RSP1 Single Point Load Cell
Use these spacers to conveniently mount the RSP1 load cells to your desired fixtures. For more information, see our Spacer for RSP1 Single Point Load Cell Page
Spacer for RAP3 Single Point Load Cell
Spacer for RAP3 Single Point Load Cell
Use these spacers to conveniently mount the RSP1 load cells to your desired fixtures. For more information, see our Spacer for RAP3 Single Point Load Cell Page
FP-325 Foot Pedal Platform
FP-325 Foot Pedal Platform
Made with special neoprene rubber sandwich base the FP-325 provides high accuracy, linearity and repeatability. The FP-325 is compatible with the #1/2-20 thread on the iLoad Pro Digital and iLoad TR Digital Load Cells. For more information, see our FP-325 Foot Pedal Platform Page
LF-325 Leveling Feet
LF-325 Leveling Feet
Loadstar's leveling feet provide ideal load cell loading with maximum side load protection. Made from hardened alloy steel with a plated finish. Includes two jam nuts, one for wrench access. For more information, see our LF-325 Leveling Feet Page
EB-325 Eye Bolt
EB-325 Eye Bolt
Eye Bolts are threaded bolts with a loop/eye at one end. The eye is used to anchor a cable, rope or chain. For more information, see our EB-325 Eye Bolt Page
Load Cell Rod Ends
Load Cell Rod Ends
Loadstar's series of Rod-Ends provide an easy way to create easy to use, self-aligning inline application. For more information, see our Load Cell Rod Ends Page
Universal Adapters
Universal Adapters
Universal adapters made from aluminum and stainless steel can be paired with our iLoad Series load cells for easy attachment using standard fixtures. For more information, see our Universal Adapters Page
Load Buttons
Load Buttons
Made from steel. This accessories is most commonly used with compression load cells. For more information, see our Load Buttons Page
Display #  
Results 1 - 10 of 10
  • «« Start
  • « Prev
  • 1
  • Next »
  • End »»
Copyright © 2013 Loadstar Sensors. All Rights Reserved.